The Stackdoor Standard stacking fences are the best security fences for protecting shops, car parks, shop windows and public entrances. They offer many advantages over classic roller grilles and shutters.
Stackdoor® is an innovative security grille whose elements stack instead of rolling up. Composed of side profiles guiding horizontal steel tubes (stainless orgalvanized) and vertical steel connectors (stainless or galvanized), Stackdoor® can be used in any situation, even those where the installation volume is extremely small. Thanks to the unique “stack-and-pin” technology, the vertical connector rods disappear into the horizontal tubes thanks to clever perforations and the grille retracts vertically by stacking rather than rolling up.
An anti-burglary security solution, Stackdoor® is in the process of EN 1627-1630 standardization for levels RC2 & RC3 and CE compliance. Stackdoor® has a unique patented mechanism that automatically locks after the grille is closed, making it impossible to force lift it.
Stackdoor®, in addition to offering protection, also guarantees visibility and air circulation with a slim and strong design. Available in STANDARD, CORNER, CURVED & XXL versions, Stackdoor® is an aesthetic grille suitable for all types of architecture, even the most original.
A space-saving design with minimal installation space
Stackdoor is made up of steel profiles and solid steel pins. Thanks to a unique stacking system, the steel connectors disappear into the horizontal beams when the gate is lifted. Unlike roller shutters, the security fence does not roll on its axis, but stacks upright. The large container in which a rolling grille has to be stored disappears as a result. Much or little installation space? Straight, round, corner or U-shape? Downward or upward closing? Extra wide passage or an extra narrow solution? Stackdoor can be used in virtually any situation. Thanks to the minimal installation space, the security fence can be perfectly combined with heat curtains and/or automatic doors.
Burglar-resistant: stronger than a roller grille or roller shutter
Because Stackdoor is not rolled up but stacks upright, there were no conditions attached to material thicknesses in the development of the fence. Stackdoor is therefore constructed from materials that are significantly stronger than those of traditional rolling grilles and has a unique patented mechanism that allows the gate to lock itself when closed. It is impossible to lift the gate. This gives you optimal protection against burglary, ram raids and vandalism.
Options and finishes
The Stackdoor stacking fence is supplied with a key switch as standard. All access controls are available as an option (card reader, badges, detectors, remote control, …).
Depending on the application, Stackdoor stacking fences are supplied with motors for a high or low opening and closing cycle.
The Stackdoor stacking fences can be supplied in different finishes:
- Stainless steel
- Painted in all RAL colours
Advantages of the Stackdoor Standard staking fences
- Space-saving: Takes up less space than a classic roller grille.
- Burglar-resistant and vandal-resistant thanks to sturdy, heavy-duty construction.
- CE conformity (certification pending).
- Open structure with unobstructed view, ventilation and attractive appearance.
- Available in stainless steel and all RAL colours.
- Different shapes possible: straight (Standard), curved (Curved) or as a corner model (Corner).
- Both downward and upward closing.
Made to measure, also in XXL dimensions
The Stackdoor stacking fences are completely custom-made. Thanks to our XXL concept, the stacking gates can be delivered up to a width of 24 m and a height of up to 7 m. The minimum dimensions are 1 m wide and 0.5 m high.
Frequently asked questions about the Stackdoor Standard staking fences
The Stackdoor stacking fences are available up to a maximum width of 24 m and a maximum height of 7 m.
The Stackdoor stacking fences are available from a width of 1 m and a minimum height of 0.5 m.
The stacking fences can be finished in stainless steel, galvanized or painted in all RAL colours.
As standard, the stacking fence is equipped with a key switch. Optionally, all possible types of controls and access controls are possible. From card readers, badges, detectors and remote controls to more advanced access controls and integration into your home automation.
Because a stacking fence must not be able to be rolled up, there is no limitation in the thickness of the metal profiles. After all, these are stacked so that much more robust profiles can be used than with a roller grille or roller shutter.